Best answer: Can a trolling motor push a kayak up river?

Can You Use a Trolling Motor to Push a Canoe or Kayak Upstream? The short answer is, yes, you can.

How much weight can a trolling motor push?

Trolling motors are offered in 12V, 12/24V, 24V and 36V versions, with the most powerful ones offering more than 100lb. of thrust, powerful enough to move heavy vessels such as pontoon boats. Maximum thrusts at different voltages are approximately 12V/55lb.

How fast can a trolling motor push a kayak?

Higher thrust 12V trolling motors are designed for bigger heavier boats with larger payloads. The maximum speed of a trolling motor is 5 mph regardless of how many pounds of thrust.

Can a trolling motor push a canoe?

Electric Trolling Motors are Quiet – Electric trolling motors will push your canoe through the water with almost as little noise and water disturbance as you create when you’re paddling it.

IT IS INTERESTING:  You asked: Are bikes with motors legal?

What size trolling motor do I need for a kayak?

Ideally, you need a minimum of two pounds of thrust per 100 pounds of weight you want to move. Most trolling motors are made for small boats, which means they have more than enough power to drive your kayak through the water.

How much can a 30 lb trolling motor push?

So the maximum for a 30lb thrust motor would be 30*100/2= 1500lbs.

How fast will a 112 lb thrust trolling motor go?

How Fast Will A 112 lb. Thrust Trolling Motor Go? Ultimately a 112 lb. thrust trolling motor will still have a maximum speed of around 5 mph.

How fast will a 45 lb thrust trolling motor go?

1 40# TM pushing a 12ft boat 4.3 is impressive. Most guys here that run all electric run 150# of thrust or better to get 4.5mph.

How deep should a trolling motor be in the water?

Setting your trolling motor at an appropriate depth will help it to function properly, while at the same time reducing the risk of it becoming damaged. Remember, the general rule is to keep the motor submerged 12 inches below the water line.

How many horsepower is 50 lbs of thrust?

As a point of reference, remember that each pound of thrust is equal to about 0.05 horsepower. So, an average 50-pound thrust motor puts out about 2.5 horsepower, while the largest of this breed (about 100 pounds of thrust) put out about 5 horsepower.

Can I go upstream with a trolling motor?

So yes, it is possible to use a trolling motor to get upstream in your kayak or canoe.

IT IS INTERESTING:  Why do diesel engines make more torque?

How many pounds of thrust does a 2.5 hp outboard motor have?

The rule of thumb I go by is 1 HP = About 22 lbs of thrust. So it’s about 55 lbs of thrust for 2.5 HP.

Can you make a trolling motor faster?

The best way that I have always found to increase the speed of a motor is to increase the power of the motor by removing the current motor and installing one that has more power with a larger size and larger pitch prop. Bottom line – a motor only has so much power and spin a propellor only so fast.

How fast will a 55 lb thrust trolling motor go?

Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour. This would take around two hours for the deep cycle battery charge to get completely depleted.

What size battery do I need for a 55 lb thrust trolling motor?

Most trolling motor batteries fail due to lack of proper charging. We suggest selecting a 12 volt deep cycle marine battery with at least a 110 amp hour rating, usually a group 27 size battery. The higher the amp hour rating, the more run time you will receive.

How do I choose the right size trolling motor?

General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.

IT IS INTERESTING:  How do I find motor rating?
Motorization