Best answer: What do you need for a 24V trolling motor?

What size wire do I need for a 24 volt trolling motor?

In most cases, the manufactures recommended wire is 8 gauge for most 24-volt systems and 6 gauge for a system of 20 feet or longer. To account for voltage-drop, heat and current changes resulting from low batteries I recommend 6 gauge wire and 4 gauge for over 15 feet.

How do you wire a 24 volt trolling motor?

Feed the wires through the plug housing. On the 12-24V trolling motor plug, connect the positive 24V wire to the terminal marked “24”, the 12V wire to the terminal marked “12” and the negative wire to the terminal marked “-”. On straight 24V trolling motors, connect the two wires to “24” and “-” as appropriate.

Can you run a 24 volt trolling motor on 12 volts?

For a cable steer or hand controlled model this will not hurt the motor, but it will considerably affect the performance of the motor. … However, an electric steer motor, such as, the PowerDrive, Terrova, or Ulterra cannot be used on lower voltages.

IT IS INTERESTING:  Quick Answer: What factors affect the operation of a simple electric motor?

What is needed for a trolling motor?

General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.

What gauge wire should I use for a 12 volt trolling motor?

Wire Gauge And Circuit Breaker Size Guide

Cell Amps drawn 10 ft length
12 volt 30 10 awg
12 volt 42 8 awg
12 volt 50 6 awg
24 volt 42 10 awg

What is the best battery to use for a trolling motor?

10 Best Trolling Motor Batteries Compared

Battery: Type: Reserve:
1. BPS Pro Series AGM X-900 AGM 195 min
2. Odyssey Trolling Thunder AGM 135 min
3. BPS Pro Series Deep Cycle AGM 150 min
4. VMAX Charge Tanks MR-137 AGM 230 min

Why does my trolling motor have 3 wires?

The three wires are for a trolling motor that will operate on either 12 volts or 24 volts. 12/24 volt motors have a switch to choose which you want. Thus the third wire to send power to the 24 volt side of the switch. The red and black wires operate the 12 volt side.

Does a 24 volt trolling motor need 2 batteries?

24 Volt Systems (2 Batteries)

1. Two 12-volt deep cycle batteries are required. 2. Make sure that the trolling motor is switched to the off position or speed selector set to “0”.

Can you charge a 24 volt system with a 12 volt charger?

You cannot use the 12V charger directly to charge a 24V battery. To do the task you will need a boost converter capable of generating output voltage greater than 24V. Boost converters step up the voltage, keeping the input and output power constant.

IT IS INTERESTING:  Your question: Why would a spark plug explode?

Which is better 12V or 24v trolling motor?

Trolling Motor Voltage & Batteries

A 12-volt trolling motor is the most inexpensive and easiest to run. … A 24- or 36-volt system will allow the angler to fish longer periods out on the water, as they draw lower amps while providing increased thrust for more power.

How do I know if my trolling motor is 12V or 24v?

The nameplates are most often found in the foot petals of the motor. Otherwise, you can look at the configuration of the trolling motor batteries to find the volts. Open the hood and look at the battery. If you see 6 cells, it’s a 12-volt battery, but if you see 12 cells, it means it’s a 24-volt battery.

How fast will a 112 lb thrust trolling motor go?

How Fast Will A 112 lb. Thrust Trolling Motor Go? Ultimately a 112 lb. thrust trolling motor will still have a maximum speed of around 5 mph.

How deep should a trolling motor be in the water?

Setting your trolling motor at an appropriate depth will help it to function properly, while at the same time reducing the risk of it becoming damaged. Remember, the general rule is to keep the motor submerged 12 inches below the water line.

What size trolling motor do I need for a 20 foot boat?

Trolling Motor Thrust Guide

Boat Weight (lbs) 1,500 4,000
Boat Length Sub 14′ 20′
Minimum Thrust 30 80
Performance Thrust* 40 90
Motor Voltage 12v 24v
Motorization