The vertical fins increase effectiveness of steering with less power consumption. The horizontal fluke acts like a shock absorber to dampen boat bobbing increasing your comfort and safety. … The steering response is improved when using thrust or when using another motor for propulsion.
What does the skeg do on a trolling motor?
Do you think that’s a problem? The skeg on a trolling motor, unlike that on a big outboard is primarily there to protect the motor housing and the blade from impact.
Can I cut the skeg off my trolling motor?
I cut the skeg off with my hand held grinder. Used hose clamps to mount the puck transducer and the LSS-2 transducer which comes with a bracket that the steel clamps attach to very well. Next I cut the aluminum tubing to size and drilled holes for the clamps and holes for the water to drain.
How low should your trolling motor be?
Setting your trolling motor at an appropriate depth will help it to function properly, while at the same time reducing the risk of it becoming damaged. Remember, the general rule is to keep the motor submerged 12 inches below the water line.
Can you make a trolling motor go faster?
The best way that I have always found to increase the speed of a motor is to increase the power of the motor by removing the current motor and installing one that has more power with a larger size and larger pitch prop. Bottom line – a motor only has so much power and spin a propellor only so fast.
How fast will an 80 lb thrust trolling motor go?
How Fast Will A 80 lb. Thrust Trolling Motor Go? it is important to note that more thrust does not mean more speed. The trolling motor’s maximum speed is around 5 mph no matter how many lbs (pounds) of thrust it provides.
How many pounds of thrust does a 2.5 hp outboard motor have?
The rule of thumb I go by is 1 HP = About 22 lbs of thrust. So it’s about 55 lbs of thrust for 2.5 HP.
Will 2 trolling motors make you go faster?
Two trolling motors don’t increase the speed much. You will be soaring if you get 4 to 6 mph with two trolling motors. Even on a lake where you can only use electric motors, using one trolling motor is still the superior choice.
Is it bad to run a trolling motor out of water?
Your motor is cooled by the water around it, while running it out of the water for a very short time would be OK, it would take a long time to drain the battery much running the motor out of the water with no load.
Is a 3 blade prop better than 2 trolling motor?
As a general rule the two blade prop = more power but less weedless. Three and four blades = less power but more weedless. An exception would be Minn Kota’s Weedless Wedge props. They’re two bladed but are very weedless and give lots of thrust at the same time.