Compound wound motors are usually used where you need higher starting torque and relatively constant speed. The compound DC motors applications are in presses, shears, conveyors, elevators, rolling mills, heavy planners, etc.
What are the uses of the DC motor?
At home, small DC motors are used in tools, toys and various household appliances. In retail, the applications of DC motors include conveyors and turntables, while in an industrial setting, large DC motor uses also include braking and reversing applications.
What is the advantage of DC compound motor?
Compound DC motor provides high starting torque and also provides good speed regulation. However, it is a compromise between both types of motors, which means it has good starting torque as compared to series DC motor but slightly lesser than shunt DC motor.
What are the commercial and industrial applications of compound DC motors?
Compound DC motors offer both high starting torque and good speed control, making compound DC motors suitable for a variety of applications such as business machines, machine tools, agitators, shears, presses, and reciprocating machines.
What is the most common type of dc motor?
Mainly there are two types of DC Motors. One is Separately Excited DC Motor and other is Self-excited DC Motor. The self-excited motors are further classified as Shunt wound or shunt motor, Series wound or series motor and Compound wound or compound motor.
What is the full form of dc motor?
A direct current (dc) motor is an electric machine that converts electrical energy to mechanical energy.
What is the principle of DC motor?
DC motors operate on Faraday’s principle of electromagnetism which states that a current-carrying conductor experiences a force when placed in a magnetic field.
Which motor is more powerful AC or DC?
AC motors are generally considered to be more powerful than DC motors because they can generate higher torque by using a more powerful current. However, DC motors are typically more efficient and make better use of their input energy.
What are the disadvantages of DC motor?
Disadvantages of DC motors
- High initial cost.
- Increased operation and maintenance cost due to the presence of commutator and brush gear.
- Cannot operate in explosive and hazard conditions due to sparking occur at brush (risk in commutation failure)
20.10.2017
What are the disadvantages of DC?
Disadvantages of DC Transmission:
- Due to commutation problem, electric power can’t be produced at High (DC) Voltage.
- In High Voltage transmission, we cant step-up the level of DC Voltage (As Transformer won’t work on DC).
- There is a limitation of DC switches and circuit breakers (and they are costly too).
Why DC motor is used in industry?
For industrial applications that require constant low-speed torque or precise speed adjustments, DC motors are likely going to be the best choice. They’re easier to maintain and provide superior speed control while eliminating the problems caused by harmonic effects.
Why starter is used in DC machine?
Starters are used to protect DC motors from damage that can be caused by very high current and torque during startup. They do this by providing external resistance to the motor, which is connected in series to the motor’s armature winding and restricts the current to an acceptable level.
What are the 4 types of DC motor?
There are 4 main types of DC motors:
- Permanent Magnet DC Motors. The permanent magnet motor uses a permanent magnet to create field flux. …
- Series DC Motors. In a series DC motor, the field is wound with a few turns of a large wire carrying the full armature current. …
- Shunt DC Motors. …
- Compound DC Motors.
5.07.2017
What will happen if DC motor is used without starter?
What will happen if DC motor is used without starter? Explanation: It would cause intolerably heavy sparking at the brushes which may destroy the commutator and brush-gear. Sudden development of large torque will cause mechanical shock to the shaft, reducing its life.
How do you identify a DC motor?
Look for the commutator & brushes and salient field system to confirm. (iii) has 5 terminals, then it is a AC synchronous motor (3 for stator and 2 for field). Look for 2 slip rings for rotor dc supply. (iii) has 4 terminals, then it may be a DC motor, in which case look for the commutator & brushes to confirm.