Best answer: What type of motor is a 48Y?

The Flex-frame motors are usually labeled as 48Y, but will have the distinct pedestal at its base. The Flex is unique because it uses four thin partially threaded screws (known as thru bolts) that are slid the length of the motor through the back end and screwed into the seal plate.

What is the difference between 48Y and 56Y frame?

The only difference between the 56Y and 48Y frame is the circumference of the motor. They will both mount to the seal plate of the pump. Because of the different motor sizes, you will need to adjust the relative heights of pump and motor so that they line up properly if you mix the frames.

What type of shaft does a 56Y frame motor have?

Its large 6.5 frame boasts a stainless steel shaft for extremely durable housing and its thermally protected, Class B insulated design keeps the motor cool to prevent overheating.

What does FR mean on a motor?

In automotive design, an FR, or front-engine, rear-wheel-drive layout is one where the engine is located at the front of the vehicle and driven wheels are located at the rear.

IT IS INTERESTING:  Frequent question: Can bad motor mounts cause vibration at high speeds?

What does 56J mean?

C-Face Threaded Frame:

A threaded frame means that the face of the motor mounts onto the body of the pump and that the impeller is threaded onto the motor shaft. These are also referred to as a 56J frames.

What is 48Y frame on motor?

The Flex-frame motors are usually labeled as 48Y, but will have the distinct pedestal at its base. The Flex is unique because it uses four thin partially threaded screws (known as thru bolts) that are slid the length of the motor through the back end and screwed into the seal plate.

What is a 56 frame?

The frame number relates to the “D” dimension (distance from center of shaft to center bottom of mount). For example, in the two-digit 56 frame, the “D” dimension is 31/2”, 56 divided by 16 = 31/2”.

What is motor frame number?

The two-digit frame number relates to the shaft height in sixteenths of an inch. You can figure that a 48-frame motor will have a shaft height of 48 divided by 16, or 3 in. Similarly, a 56-frame motor has a shaft height of 3.5 in.

What size is a 48 frame motor?

NEMA electrical motor frame dimensions

NEMA Frame Designation Frame Dimensions (inches)
D E
42 2 5/8 1 3/4
42C 2 5/8 1 3/4
48 3 2 1/8

What is pump frame size?

Difference Between 48 Frame & 56 Frame Pump

Hot tub pumps typically come in two different frame sizes: 48 frame and 56 frame. When replacing a hot tub pump, it is important to replace it with the same size pump so that the holes and plumbing will line up.

IT IS INTERESTING:  Frequent question: How much oil does a Cummins ISC hold?

What is a Type P motor?

A ‘p’ type motor is a motor specifically designed to support and accommodate the proper form of ‘p’ type protection, so it can safely operate in a given hazardous gas environment. … Once these standards are met, EM can have the motor tested and certified by an Authorized Test Institution if desired by the customer.

What information is on a motor nameplate?

Nameplate-defined parameters for the motor such as power factor, efficiency, torque, and current are at rated voltage and frequency. Application at other than nameplate voltage will likely produce different performance. It is common for manufacturers to nameplate a wide variety of voltages on one motor nameplate.

Can I replace a 1hp pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. … This will provide the flow that is needed to circulate your pool water properly and save you from high electricity bills at the same time.

Can a pool pump be too big?

There is a very persistent myth in the pool world that the higher the horsepower, the better. As a result, it is probably safe to say that the majority of pools have oversized pumps. … Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly.

Are pool pumps AC or DC?

Pool pumps are now available in DC, which is a great way to lower your power bill. By utilizing the pump during daylight hours, it can run off solar panels whenever the sun shines. Bear in mind that pressure and submersible pumps are readily available in DC, as well as refrigerators, freezers and air conditioners.

IT IS INTERESTING:  Frequent question: How do you remove a stuck spark plug gasket?
Motorization