|Type:||6.0L Gen IV V8 Small Block|
|Firing order:||1 – 8 – 7 – 2 – 6 – 5 – 4 – 3|
|Bore x stroke:||101.6 x 92 mm|
|Bore Center (mm):||111.76|
|Fuel system:||Sequential fuel injection|
What size is a 6.0-liter engine?
6.0 Vortec Performance Specs
Both the Gen III and Gen IV 6.0 L Vortec engines had identical displacement of 5.967 L, or 364.1 cubic inches. These engines had a bore of 4.0 inches with a stroke of 3.62 inches.
Is the 6.0 Vortec an LS engine?
The Vortec 6.0 is an engine made by General Motors. The engine is primarily used in the company’s heavy-duty vans, SUVs, and pick-up trucks. The Vortec 6.0 is part of the General Motors family of engines called LS that has a displacement range of 4.8- to 7.0-liter.
What size is a 6.0 LS?
Chevy LS Engine Displacment, Bore & Stroke Chart
|5.7L / 346 c.i.d.||3.898 in.||3.622 in.|
|6.0L / 364 c.i.d.||4.000 in.|
|6.2L / 376 c.i.d.||4.065 in.|
|7.0L / 427 c.i.d.||4.125 in.||4.000 in.|
Which 6.0 LS is the best?
The LQ4 6.0L is good, but the later LY6 is even better!
- Both the LQ4 and LY6 featured iron 6.0L blocks, but the LQ4 featured a Gen 3 versions, while the LY6 offered an improved Gen IV block.
- The LQ4 featured dish pistons that combined with the chambers in the 317 heads to produce a static compression ratio of 9.4:1.
Is a Chevy 6.0-liter a big block?
366. The 366 cu in (6.0 L) Big Block V-8 gasoline engine was used only in Chevrolet medium duty trucks and in school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.
Which LS engine is best?
If you’re planning on boosting your project the 4.8L truck engine will be perfect for you. The 4.8L can take insane amounts of boost completely stock and will really perform well. If you don’t want a barebones 5.3L or 4.8L you could always step up to a 6.2L truck block which is based on the LS3 engine.
How much horsepower can you get out of a 6.0 Vortec?
They can handle about 800 hp and 7,000 rpm in boosted applications (at least for a while). They are likely to bend before they break when subjected to real track conditions. If you’re getting forged pistons, upgrade to forged connecting rods at the same time.
How much horsepower does a 6.0 liter Vortec have?
GM 6.0L Vortec V-8 Engine Specs
|Engine:||General Motors 6.0L Vortec V-8 (Vortec 6000)|
|Peak Horsepower:||360 HP @ 5,400 RPM|
|Peak Torque:||380 HP @ 4,200 RPM|
Is the Chevy 6.0 a good engine?
Overall, the 6.0 vortec is an extremely dependable and reliable motor. These engines frequently last beyond 300,000 miles with minimal issues beyond regular maintenance. However, making it to 300,000 miles will likely require some non-engine repairs and maintenance, such as suspension components.
How much can a 6.0 LS block be bored?
The 6.0L block—used in the LQ4, LQ9, and LY6—is the most popular with hot rodders. It features a 4.000-inch bore and can be purchased brand new for $800. It can safely accommodate a 4.030-inch bore and is good for 421 ci when matched with a 4.125-inch stroke.
How much does a fully dressed 6.0 Ls weight?
The engines weigh about 460 lbs. fully dressed with accessories and flexplate.
Are 5.3 and 6.0 blocks the same?
Flassh, Actually the 6.0 motor is the same small block that the 5.3 utilizes. The 5.3 is 327 cu. in. and the 6.0 is the same block bored to a 366 cu.
Which is better LS1 or LS2?
The LS2 intake is slightly better than the LS1 intake. … The LS2 intake has a larger opening and larger intake runners. It’s also designed for a 6.0L motor and flows enough air to keep a 400 horsepower 6.0L happy. The LS1 intake is designed for a 5.7L and flows enough air to keep a 350+ horsepower 5.7L happy.