20 psi boost is about right for a stock engine. The ’98 12 valve with an auto is rated at 180HP. Your 24 valve is rated higher than that, plus it has a computer controlled injection system which is a lot more efficient.
How much boost does a stock 5.9 Cummins make?
Stock 98-04 trucks should generate 18-23psi of boost pressure stock (depending on year model). With the Boost Fooler you will be able to run 35+ psi of boost depending on your fueling enhancements. The 2004.5-2007 5.9L Cummins uses an electronic wastegate which is operated off of the MAP sensor.
How much boost does a HX35 make?
Bottom line 35psi max for a stock HX35 with 12cm exhaust housing. A little more with a 14mm exhaust housing.
How much HP can a stock Cummins handle?
The 5.9L inline-six mill’s factory rotating assembly from ’89 to ’02 is capable of handling 800 hp (1,400 to 1,600 lb-ft of torque) without breaking a sweat, and is often pushed into four-digit territory before aftermarket rods become a consideration.
What size turbo is on a 12 valve Cummins?
The stock specs for a 12-valve Holset HX35 will vary from year to year and whether the truck was a manual or auto, but the compressor inducer will be between 54 and 56mm. While popular upgrades for common rail trucks range between 64 and 67mm, a hot street 12-valve 5.9 needs to be a bit smaller.
How much HP can a stock 24 valve Cummins handle?
From the factory, the engines were rated at 235 hp and 460 lb-ft of torque. The high flowing aftermarket VP44 pumps are now almost capable of supporting 800-plus horsepower on straight No. 2 (No. 2 is in reference to using only pump fuel) and more than 1,000 horsepower with nitrous.
How much boost can a stock 6.7 Cummins handle?
The stock head bolts should be good up to about 45psi back pressure, and 38 psi boost.
How much boost can a stock HX35 handle?
The HX35 can support a LOT of hp, but it all depends on how it’s being used. On a stock engine, it might support 350 hp @ around 32psi of boost. With an aftermarket cam (like a Helix 2 or somesuch), it would probably support 425+hp or more @ around 32psi of boost.
How much boost can a HX40 handle?
40 PSI is the rating for a HX40.
What is a boost elbow on 12v?
The boost elbow allows for more boost than stock but less than a blocked waste gate.
How much HP can a stock 12v Cummins handle?
While the factory 12-valve rods can handle 1,000 hp, Scheid Diesel does recommend upgraded rod bolts anytime you’re in the neighborhood of 800 hp. Scheid offers these heavy-duty 12-point rod bolts, made by ARP, which are 23% stronger than the stock fasteners.
What is the strongest Cummins Engine?
With an output of 4000 hp and more, Cummins’ new QSK95 is the world’s most powerful high-speed diesel engine. The 95-litre 16-cylinder QSK95 is the first engine to be introduced in a new high-horsepower diesel and gas platform from Cummins.
What is the best year Dodge Cummins to buy?
- 1989-1993 Dodge Ram 2500 and 3500 – Timeless Diesel. …
- 2003-2008 Dodge Ram 2500 and 3500 Heavy Duty – Best Used Diesel Value. …
- 2010-2013 Ram 2500 Heavy Duty – Most Capable Diesel. …
- 1999-2003 Super Duty – Best Budget Diesel. …
- 2008-2010 Super Duty – Best Diesel to Modify.
How many miles will a 12 valve Cummins last?
You can easily get 300k miles on even a modified cummins. Fix the killer dowel pin before you put it in, and it will be fine for a long time.
What is the best year for 12 valve Cummins?
1996-1998 has the best injection pumps (perhaps ignoring the 1989-1993 VE) and stronger automatics compared to earlier years. Look at the buyers guide section in the thread below. The 1998 12 valve trucks were only built in 1997.