|ENGINE||FORD 390 FE BIG BLOCK|
|BORE||4.05 INCHES (102.87 MM)|
|STROKE||3.785 INCHES (96.14 MM)|
|HORSEPOWER (1963)||250 HP (190 kW)|
How much horsepower can a Ford 390 make?
The 390 cu in (6.4 L) 2v is rated at 265 bhp (197.6 kW) @ 4,100 rpm, while the 4v version was rated at 320 bhp (238.6 kW) @ 4,100 rpm in certain applications. Certain 1967 & 68 Mustangs had 390 4v engines rated at 335 horsepower (250 kW), as did some Fairlane GTs and S code Mercury Cougars.
Is the Ford 390 a good engine?
They are a good engine. Just that they were designed in the 50s and it shows. Low tech, heavy, and overly complex by later standards (SBF, 335, 385).
How much torque does a 390 Ford engine have?
The 4V 390 engine used in the 1961 Thunderbird had hydraulic valve lifters and five main bearings on the crankshaft. Its compression ratio was 9.6:1. It produced 300 brake horsepower at 4,600 rpm. Its maximum torque rating was 427 pound-feet at 2,800 rpm.
What is the difference between a Ford 360 and 390?
The block, heads, intake and all outer engine parts are identical. The difference is the stroke. 360 has a 3.50″ stroke, while a 390 is 3.78″. Crank, rods, and pistons are all that differ between the 2.
How much does it cost to rebuild a Ford 390 engine?
Crank regrind, and mag around $125. Figure a decent set of pistons, bearings, cam and lifters, gaskets and miscelaneous another $800. I would bet around $2k to do a decent build with quality parts… That’s zactly what my 390 rebuild cost.
When did Ford stop making the 390 engine?
The Ford 390 was phased out of use in passenger cars in 1971, though it found a niche as a durable and torquey pickup truck motor until 1976. It served this role well, and there are still many Ford trucks on the road with 390 engines.
How much does a 390 Ford engine weigh?
The ERA cobra guys did a study on a 390 motor. The all-iron version weighs 610 lbs stock. By adding aluminum heads, manifold, and water pump they got the weight down to 520 lbs.
How many CFM is a Ford 390?
There is so much information needed to answer your question correctly, but generally a 600 cfm is all you need and gives good throttle response.
How much oil does a Ford 390 hold?
Is a Ford 360 a good motor?
The 360 is a Low Compression, High Torque Truck Motor. Not good in stock form for a hot rod. But, you have a ready made 390 block that can easily be turned into a monster with the right parts and cash (See Barry Robotnick’s 445 Stroker Kit).
What Ford engine has the most horsepower?
The all-new 2020 Mustang Shelby GT500 will boast the most powerful Ford engine. This formidable supercharged engine will generate 760 horsepower and 625 pound-feet of torque. That means the revolutionary 2020 Mustang GT500 will be the most powerful street-legal Ford in history.
How much torque does a Ford 360 have?
The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 RPM and a max torque of 327 at 2,400 RPM.
Will 390 heads fit on a 360?
Re: 390 heads on a 360
They are the very same heads.
How can I tell if my Ford is a 390?
How to Identify a Ford 390 Block
- Identify the FE block characteristics visually. …
- Locate the casting number. …
- Decode the Ford casting number. …
- Reference the casting number to a listing of known 390 cubic-inch castings, similar to those found on the Fordification and What Are You Working On? websites.
- Measure the bore and stroke.