How much transmission fluid does a 5 9 Cummins hold?

Engine oil 1998.5 – 2002 12.0 qts w/ filter
Manual transmission fluid NV4500 HD (5 spd) 4.0 qts (8 pts)
NV5600 (6 spd) 4.75 qts (9 pts)
Transfer case fluid NV231HD 1.25 qts (2.5 pts)
NV241 2.3 qts (4.6 pts)

How much transmission fluid does a 5.9 Cummins hold?

17 quarts for a total trans and tc.

How many quarts of transmission fluid does a 2001 Dodge Cummins take?

Fill the transmission with new ATF through the dipstick tube. The service refill capacity on the 47RE and 47RH transmissions is approximately 4 quarts, but this is only an estimate. Reinsert and check the fluid level frequently as you add fluid to prevent overfilling.

How much transmission fluid does a Ram 3500 take?

2007 – 2017 Ram 2500/3500, 6.7L Cummins Fluid Specs & Capacities

Engine oil 2007.5 – 2018 12 qts oil capacity w/ oil filter change
2019
Engine cooling system 2007.5 – 2012 ~ 5.7 gallons
2013 – 2019
Automatic transmission fluid 68RFE 6 spd auto 17.5 qts total capacity ~ 5.5 – 6.5 qts service refill
IT IS INTERESTING:  You asked: Is General Motors an LLC?

How many quarts of transmission fluid does a 48RE take?

Chrysler 48RE Specs

Transmission: Chrysler 48RE
Weight: ~248 lbs
ATF Type/Spec: ATF+4 automatic transmission fluid
Fluid Capacity: 14.5 – 16.5 dry fill capacity, approx 4 qts service refill capacity
Transmission Filter P/N: MOPAR 52118789, WIX 58613

Who builds the best 48RE transmission?

The 48RE is actually a pretty good transmission. It is made in house by Chrysler. If you look at them they have done most of the upgrades that we do to the 47re to make them stronger. They have the 6pin planetary gears, extra clutches.

Is the 48RE a good transmission?

The main weak spots, in general, of the 48RE are: line pressure, torque converter and the input shaft due to it’s locked 3-4 shift. Other than those, they’re a pretty good towing transmission.

What kind of transmission fluid does a 68RFE take?

Chrysler 68RFE Specs

Transmission: Chrysler 68RFE
Weight: ~ 263 lbs
ATF Type/Spec: ATF+4 automatic transmission fluid
Transmission Filter P/N: External filter MOPAR 5015267AD
Sump filter MOPAR 5013470AE

What kind of transmission fluid does a Dodge 3500 take?

Valvoline MaxLife Synthetic Transmission Fluid Multi-Vehicle 1 Quart.

What kind of transmission fluid does a 47re take?

Any synthetic ATF will be fine.

How Much ATF does a 68RFE hold?

The 6-7 quarts figure is for just the amount in the pan. If you let it drain a while (especially with the spin-on filter off), up to half of the fluid in the converter will drain out also (whether it’s on an incline or not).

How long will a 6.7 Cummins last?

Ram claims the Cummins 6.7 engine to be good for 350,000 miles. The mileage is guaranteed if the scheduled services has been carried out timeously and no performance modifications have been done to the engine.

IT IS INTERESTING:  You asked: Do diesel engines take longer to warm up?

How long does it take to break in a 6.7 Cummins?

Break in period on a Cummins is about 100,000 miles.

How many speed is a 48RE transmission?

48RE: An electronically controlled four-speed automatic transmission found in ’03 to’07 Dodges.

How many gears are in a 48RE transmission?

The 48RE transmission has electronic shift controls and a four-speed gear layout, including overdrive.

How many gears does a 47RE transmission have?

The 47RE carries a 450 pound-feet internal torque rating, which approximates to 610 newton-meters. It has three normal gears, one overdrive gear, and reverse. The original design for the 47RE has changed little over the years, albeit with some bells and whistles added.

Motorization